Allied Telesis AT-S63 - Manual (Page 368)

Chapter 17: Quality of Service
368 Section II: Advanced Operations
6. Type D to delete the traffic class.
The traffic class is deleted from the switch. The class is removed from
any policies to which it is assigned.
7. To delete another traffic class, repeat this procedure starting with step
4.
8. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Displaying
Traffic Classes
To display the traffic classes, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 6 to select Quality of
Service.
The Quality of Service (QoS) menu is shown in Figure 116 on page
352.
3. From the Quality of Service (QoS) menu, type 2 to select Traffic Class
Configuration.
The Traffic Class Configuration menu is shown in Figure 123 on page
361.
4. From the Traffic Class Configuration menu, type 4 to select Show
Traffic Classes.
The Show Traffic Classes menu is shown in Figure 127.
Figure 127. Show Traffic Classes Menu
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Show Traffic Classes
Number of Traffic Classes: 5
Parent
ID Description Policy ID Active
-------------------------------------------------------------
0
Dev database 6 Yes
1 Inv database 12 No
2 Video1 4 Yes
3 Video2 5 Yes
4 Demo dev 2 Yes
D - Display Traffic Class Details
U - Update Display
R - Return to Previous Menu
Enter your selection?