Allied Telesis AT-S63 - Manual (Page 445)

AT-S63 Management Software Menus Interface User’s Guide
Section IV: SNMPv3 445
The Modify SNMPv3 View Table menu is shown in Figure 152.
Figure 152. Modify SNMPv3 View Table Menu
4. To modify the Subtree Mask for this view, type 1 to select Set Subtree
Mask.
The following prompt is displayed:
Enter View Name:
5. Enter an existing View Name.
The following prompt is displayed:
Enter View Subtree (OID format/Text Name):
6. Enter Subtree that this view will or will not be permitted to display.
You can enter either a numeric value in hex format or the equivalent
text name. For example, the OID hex format for TCP/IP is:
1.3.6.1.2.1.6
The text format is for TCP/IP is:
tcp
The following prompt is displayed:
Enter Subtree Mask (Hex format):
7. Enter a Subtree Mask in hexadecimal format.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Modify SNMPv3 View Table
View Name ................. tcp
Subtree OID ............... 1.3.6.1.2.1.6
Subtree Mask .............. ff:ff
View Type ................. Included
Storage Type .............. NonVolatile
Row Status ................ Active
1 - Set Subtree Mask
2 - Set View Type
3 - Set Storage Type
U - Update Display
R - Return to Previous Menu
Enter your selection?