Allied Telesis AT-S63 - Manual (Page 823)

AT-S63 Management Software Menus Interface User’s Guide
Section VIII: Management Security 823
Displaying SSH Information
To display SSH server information, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 87 on page 291.
2. From the Security and Services menu, type 8 to select Secure Shell
(SSH).
The Secure Shell (SSH) menu is shown in Figure 282 on page 820.
3. From the Secure Shell (SSH) menu, type 6 to select Show Server
Information.
The Show Server Information menu is shown in Figure 283.
Figure 283. Show Server Information Menu
The Show Server Information menu provides the following information:
Versions Supported
The versions of SSH which are supported by the AT-S63 management
software.
Server Status
Whether or not the SSH server is enabled or disabled.
Server Port
The well-known port for SSH. The default is port 22.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Show Server Information
Versions Supported ....... 1.3, 1.5, 2.0
Server Status ............ Enabled
Server Port .............. 22
Host Key ID .............. 200
Host Key Bits ............ 1024
Server Key ID ............ 250
Server Key Expiry ........ 0 hours
Login Timeout ............ 180 seconds
Authentication Available . Password
Ciphers Available ........ 3DES, 128 bit AES, 192 bit AES,256 bit AES,
Arcfour (RC4)
MACs Available ........... hmac-sha1, hmac-md5
Data Compression ......... Available
R - Return to Previous Menu
Enter your selection?