Allied Telesis AT-S63 - Manual (Page 835)

AT-S63 Management Software Menus Interface User’s Guide
Section VIII: Management Security 835
Displaying the TACACS+ Settings
To display the TACACS+ settings, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4 on page 54.
2. From the System Administration menu, type 6 to select Authentication
Configuration.
The Authentication Configuration menu is shown in Figure 284 on
page 830.
3. Type 3 to select TACACS+ Configuration.
The TACACS+ Client Configuration menu is shown in Figure 286.
Figure 286. TACACS+ Client Configuration Menu
The TACACS+ Client Configuration menu provides the following
information:
TAC Server 1
TAC Server 2
TAC Server 3
The IP addresses of the TACACS+ servers.
TAC Global Secret
Global encryption secret if all the servers use the same one.
TAC Timeout
The maximum amount of time the switch waits for a response from a
TACACS+ server before assuming the server is not responding.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
TACACS+ Client Configuration
1 - TAC Server 1 .................. 142.34.56.102
2 - TAC Server 2 .................. 0.0.0.0
3 - TAC Server 3 .................. 0.0.0.0
4 - TAC Global Secret ............. tech
5 - TAC Timeout ................... 30 seconds
R - Return to Previous Menu
Enter your selection?