Allied Telesis AT-S63 - Manual (Page 49)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Operations 49
Saving Your Parameter Changes
When you make a change to a switch parameter, the change is, in most
cases, immediately activated on the switch as soon as you enter it.
However, most parameter changes are initially saved only to temporary
memory in the switch and will be lost the next time you reset or power
cycle the unit. To permanently save your changes, you must select the S -
Save Configuration Changes option from the Main Menu. The switch
saves your changes to its active configuration file. You should select that
Main Menu option whenever you have made a change to a switch
parameter that you want the switch to retain even when it is reset or power
cycled. If you do not see the option in the Main Menu, there are no
parameter changes to be saved.
Note
For further information on a switch’s configuration file, refer to
“Working with Boot Configuration Files” on page 207.