Allied Telesis AT-S63 - Manual (Page 357)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 357
The Quality of Service (QoS) menu is shown in Figure 116 on page
352.
3. From the Quality of Service (QoS) menu, type 1 to select Flow Group
Configuration.
The Flow Group Configuration menu is shown in Figure 117 on page
353.
4. From the Flow Group Configuration menu, type 3 to select Destroy
Flow Group.
The following prompt is displayed:
Available Flow Group(s): 0-10
Enter Flow Group ID : [0 to 1023] -> 0
5. Enter the ID number of the flow group you want to delete. You can
delete only one flow group at a time.
The Destroy Flow Group menu is shown in Figure 120.
Figure 120. Destroy Flow Group Menu
6. Type D to delete the flow group.
The flow group is deleted from the switch. The group is removed from
any traffic classes to which it is assigned.
7. To delete another flow group, repeat this procedure starting with step
4.
8. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Destroy Flow Group
1 - Flow Group ID .............. 2
2 - Description ................ Video1
3 - DSCP value ................. 0
4 - Priority ................... 6
5 - Remark Priority ............ No
6 - ToS ........................
7 - Move ToS to Priority ....... No
8 - Move Priority to ToS ....... No
9 - Classifier List ............ 11
D - Destroy Flow Group
R - Return to Previous Menu
Enter your selection?