Allied Telesis AT-S63 - Manual (Page 397)

AT-S63 Management Software Menus Interface User’s Guide
Section III: IGMP Snooping, MLD Snooping, and RRP Snooping 397
Enabling or Disabling IGMP Snooping
To activate or deactivate IGMP snooping on the switch, perform the
following procedure:
1. From the Main Menu, type 6 to select Advanced Configuration.
The Advanced Configuration menu is shown in Figure 137 on page
394.
2. From the Advanced Configuration menu, type 2 to select IGMP
Snooping Configuration.
The IGMP Snooping Configuration menu is shown in Figure 138 on
page 395.
3. From the IGMP Snooping Configuration menu, type 1 to select IGMP
Snooping Status.
The following prompt is displayed:
IGMP Snooping Status (E-Enabled, D-Disabled) :
4. Type E to enable IGMP or D to disable it. The default setting is
disabled.
A change to the status of IGMP snooping is immediately implemented
on the switch:
5. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.