Leica Biosystems LPC Software installation - Manual (Page 115)

115 Leica LP C
The middle part of the form presents a graphical image of the print area, in-
cluding all of the fields that have been added to it. Rulers along the left side
and top show the image width and length respectively in the current units of
measure. The image can be scrolled up/down and left/right as needed to
see the entire image. You may also zoom in/out as needed to see the entire
image at once.
Menu
Fig. 39
The designer form contains a menu bar at the
top. The menus provided are File, Edit, View,
Tools, Setup and Help. Each menu is described in
more detail below.
File Menu
Fig. 40
The file menu provides access to the program
functions that deal with loading cassette layout
files for editing, saving layout files, printing re-
ports, etc.
New - Creates a new layout with a blank image.
If you have changed the current layout without
saving your changes, the program will prompt
you to save first. You may choose to create a
blank layout, load a layout template, or use the
"WIZARD" to create the layout.
Open - Allows you to open a cassette layout
saved on your PC's hard disk drive, a floppy
drive, or a network shared folder.
Save - Saves the current layout to disk. The file is saved using its current
name, in the folder from which it was loaded. If the file does not have a
name, a Save dialog will prompt you to enter a name and destination folder.
Save As - Allows you to save the layout with a different name and/or a dif-
ferent destination folder.
3. User Interface