Leica Biosystems LPC Software installation - Manual (Page 19)

19
LabeLase ® Producer - Installation
5c
The installer will show you a list of COM ports that are installed on your PC
as shown below.
Note that the actual list of COM ports will vary from this figure depending on
the number of ports that are installed on your PC.
Fig. 13
If you know which port you have used to connect to the printer, simply click
the name of the port to select it and then click the "Next" button.
If you want to test the port to make sure it can communicate to the printer,
proceed to step 5d below.
3. Installation