Leica Biosystems LPC Software installation - Manual (Page 117)

117
LabeLase ® Producer - Installation
Paste - Paste the fields in the clipboard to the layout. Multiple fields are
pasted as a group. If no items are in the clipboard, then this menu item is not
accessible.
Rotate - Rotate the selected field or fields by 90 degrees in the clockwise
direction. If more than one field is selected, they will be rotated as a group.
Any fields that are rotated can be restored using the Undo feature.
Align - Provides a list of alignment tools. Alignment tools are only acces-
sible if more than one field is selected.
The align menu provides tools for aligning multiple fields in various configu-
rations.
Left - Align all fields to the leftmost edge.
Right - Align all fields to the rightmost edge.
Top - Align all fields to the topmost edge.
Bottom - Align all fields to the bottommost edge.
Middle - Align all fields to the vertical middle of the objects. Fields will be
centered along an imaginary horizontal line.
Center - Align all fields to the horizontal middle of the objects. Fields will be
centered along an imaginary vertical line.
Note that the terms top, bottom, left and right refer to the fields
themselves, not the display screen.
Snap To Grid
Enables or disables the "Snap To Grid" command.
When enabled, all fields that are added or moved will have their coordinates
adjusted to match the current grid setting. This is an aid in lining up fields. If
this feature is enabled when one or more fields are selected, the selected
fields will be snapped to the grid.
Fig. 42
3. User Interface