Leica Biosystems LPC Software installation - Manual (Page 176)

176 Software Installation Manual, Revision 2 - 03/2010
The second field is the quantity of cassettes to print. This is the same value
that the operator can enter on the main form. You may omit this field and the
quantity will default to one (you must still include the separator character).
The third field is the number of copies of each cassette. This is the same
value that the operator can enter on the main form. You may omit this field
and the copy count will default to one (you must still include the separator
character).
The fourth field is the starting serial number for the layout. This is the same
value that the operator can enter on the main form. You may omit this field
and the layout's serial number will remain unchanged (you must still include
the separator character).
The fifth field is the virtual magazine identifier. This is the same value that
the operator can enter on the main form. This field is required and must be
included in the download.
The sixth is the exit bin identifier. This is the same value that the operator
can enter on the main form. You may omit this field and the exit bin will de-
fault to one (you must still include the separator character).
The remaining fields are text data that will be placed into the operator data
entry fields for the layout. You may send as many fields as there are opera-
tor data entry fields in the layout. If you wish to clear a particular field, sim-
ply omit the data (you must still include the separator character).
An example of the Standard Message Format is shown below. The Data
Separator character is set to the comma.
stainlesslayout.itl,1,1,1,101,2,A2398,123,Stainless
4. Host Communication