Leica Biosystems LPC Software installation - Manual (Page 95)

95
LabeLase ® Producer - Installation
Maximum Speed - New to Version 1.30. This field, along with the minimum
speed (above), is used to set the range of the "Darkness" track bar on the
main window. When the track bar is all the way to the left (brighter), then
this speed will be selected.
Laser Off Tickle - This field specifies the amount of "tickle" that will be used
to excite the laser when it is off. If this value is increased, the laser is ready
to use more quickly.
Laser On Duty Cycle - This field specifies the amount of time the laser is on
for any given pixel, expressed as a duty cycle (percentage).
3. User Interface