Leica Biosystems LPC Software installation - Manual (Page 145)

145
LabeLase ® Producer - Installation
Fig. 79
This page is where you add the individual fields to the layout. At the top is an
area where you define a text field. You must specify the source of the data
for the text field. You can choose the data source to be "Operator/Host",
which means that the data will be typed in by the operator or downloaded
from the host. This corresponds to a "%V" flag in the field. If you select this
source, you must also specify the operator "Prompt" and an example
("Sample" field) and a sample of the actual data that the field will hold.
If the data is to be the same each time, instead of selecting "Operator/Host"
you may select "Fixed Text" and enter the actual text in the accompanying
field.
Regardless of the source of the data, you may indicate that this field is to be
sequenced (serialized) on each print cycle. Check the "Auto Sequence the
Text" box to enable sequencing.
3. User Interface