Leica Biosystems LPC Software installation - Manual (Page 138)

138 Instruction Manual V 1.0 – 06/2010
Rotating
Any field can be rotated by using the field editor (double click the selected
field) and changing its rotation value setting. Selected fields can also be
rotated by clicking on the Rotate button or selecting the Rotate menu item. If
more than one field is selected, the field will be rotated as a group. Be sure
that all of the selected fields have the same initial rotation setting to avoid
unexpected results.
Aligning
If more than one field is selected, they can all be aligned along their top,
bottom, left or right edges, or along their horizontal or vertical centerlines
using the alignment toolbar or menus.
When multiple fields are selected, dragging a sizer box for any one field will
cause all selected fields to be resized accordingly.
Resizing
Any field can be resized by using the field editor (double click on the se-
lected field) and changing its size or its height and width values. Selected
fields can also be resized by dragging one of its sizer boxes. Dragging one of
the top sizer boxes will increase the field's height. Dragging the bottom sizer
boxes will increase its height as well as change its anchor point. Dragging a
corner box changes both its height and width. Note that dragging a sizer
box for Text and Barcode fields will only change its size/height since the
width of these fields depends on other factors such as text content and
barcode symbology/content.
Fig. 68
Left - Align all fields to the leftmost edge.
Fig. 69
3. User Interface