Leica Biosystems LPC Software installation - Manual (Page 44)

44 Software Installation Manual, Revision 2 - 03/2010
Note that the IP address of a printer that has not been configured may not
be valid for your subnet. If this is the case, it will be displayed in red. At this
point, the MAC address is more important than the IP address. Therefore,
use the MAC address to select the printer.
Select the printer you want to install, and click "Next".
If you previously selected the dynamic method (DHCP server) for configur-
ing the printer’s IP address, proceed to Step 7f below.
If you selected the static method (manual assignment) for setting the
IP address, skip to Step 7g.
3. Installation