Leica Biosystems LPC Software installation - Manual (Page 86)

86 Instruction Manual V 1.0 – 06/2010
3.1.8 Setup menu
Supervisor Password - This menu item will activate the "Change Password"
form that allows the supervisor to change the password that activates the
supervisor mode of operation. You will be required to enter the current
password as well as the new password.
Virtual Magazines - This menu item will activate the Virtual Magazine Con-
figuration form that allows the supervisor to add, modify or delete virtual
configuration types.
Units of Measure - This menu item will activate the "Units" form that allows
the supervisor to specify either English or Metric units of measure. When in
English units, the basic unit of measurement is the inch. While in Metric
units, the basic unit of measurement is millimeters.
Host Communications - This menu item will activate the "Host Communica-
tions" form, which allows the supervisor to configure the communications
link between the cassette printer and the customer's information system
(host).
Preferences - Enables the "Preferences" input mask, which enables the su-
pervisor to configure certain program preferences.
The Setup menu is only available in the Supervi-
sor mode of operation and provides several fea-
tures for configuring the operation of the cas-
sette printer.
Layout - This menu item will activate the "Cas-
sette Layout Designer" form, which allows the su-
pervisor to create and/or edit layout files for cas-
settes. This form can also be opened by
double-clicking the cassette layout icon.
Printer Model - New in V2.00 - Submenu that al-
lows you to select the LP C printer model.
Printer Configuration - This menu item will open
the "Printer Configuration" form. This allows you
to configure details about the cassette printer
such as resolution in both axes, stepper motor
rates, laser burn intensity, etc.
Fig. 11
3. User Interface