Leica Biosystems LPC Software installation - Manual (Page 35)

35
LabeLase ® Producer - Installation
If you have installed the USB drivers, a new COM port, which is actually a
"virtual" port, should have been added to your system.
If you click "Next" on this screen, the program attempts to find the newly
added "virtual" COM port.
6m
After you have installed the USB virtual COM port, you will see a screen that
looks similar to the one shown below.
Note that the actual list of COM ports will vary from this figure depending on
the number of ports that are installed on your PC.
Fig. 33
3. Installation