Leica Biosystems LPC Software installation - Manual (Page 12)

12 Software Installation Manual, Revision 2 - 03/2010
3. Installation
3.1 Minimum requirements
In order for you to be able to install and use the Leica LP C cassette printer,
your PC must have at least the following features:
• 100 % IBM PC-compatible computer
• Pentium 400 MHz
• Windows XP, Vista, 7*
• 50 MB free hard disk space
• 64 MB RAM
• 1 serial port, USB or Ethernet (for connecting the printer)
• Color monitor (800 x 600 or higher resolution recommended)
• CD or DVD drive
* Windows 95/98/Me/NT/2000 are no longer supported by LabeLase® Producer. This does not
necessarily mean that the software will not run on these platforms, but we cannot guarantee
that it will, nor do we offer technical support if not everything works.
3.2 Software installation
First insert the installation CD in your PC’s CD or DVD drive**.
If your computer is configured for autoplay of CDs, the installation program
should start automatically when the CD is inserted. If the program does not
start automatically after a short time, you can start it manually yourself by
one of the following methods:
• In Windows Explorer, navigate to the CD or USB drive and double-click
the program named LabeLaseInstaller.exe.
• Click Start/Run and type in: D:\LabeLaseInstaller.exe
If necessary, replace the drive letter with the letter for your CD or USB drive!
** If your PC does not have its own CD drive, copy the installation CD to a USB stick, and apply
the installation instructions to this device.
1