Leica Biosystems LPC Software installation - Manual (Page 16)

16 Software Installation Manual, Revision 2 - 03/2010
If you chose to connect the printer using a serial RS232 communications
port, continue on to Step 5.
If you chose to connect the printer using a USB port, continue on to Step 6.
If you chose to connect the printer using an Ethernet network connection,
continue on to Step 7.
Fig. 7
Fig. 8
Fig. 9
3.3.1 RS232 serial port
To connect the printer to the serial port on your PC, you need a serial cable
with a DB9 connector. This cable is included with the printer at delivery.
5
Fig. 10
3. Installation