Leica Biosystems LPC Software installation - Manual (Page 83)

83 Leica LP C
3.1.2 Print image The print image panel provides a graphical pic-
ture of the layout as it appears when printed.
The image is updated whenever the operator
clicks on the "Accept Data"
button (or
presses the F11 key) when there is nothing in the
print queue, and when the layout is printed.
Please note that the quality of the image display
may be less than what is actually printed on the
cassette due to loss of resolution when scaling a
very large image to fit on the display.
Fig. 5
3.1.3 Control buttons
Four buttons are provided to control the opera-
tion of the cassette printer. They correspond to
exactly the same functions as those in the printer
menu.
Note that each of these buttons has a corre-
sponding function key that enables quick access
to the desired operation.
3.1.4 Status bar
At the very bottom of the main form is the status
bar. Several panels are used to provide informa-
tion to the operator about the condition and sta-
tus of the cassette printer. As shown here, the
printer is ONLINE, IDLE and LATCHED, i.e. it is
ready to print. The "0" at the far right indicates
that no jobs are in the print queue. Other status
conditions, as well as error messages, will ap-
pear in this bar as needed.
Fig. 7
Fig. 6
3. User Interface