Leica Biosystems LPC Software installation - Manual (Page 49)

49
LabeLase ® Producer - Installation
When the Redirector Installer starts, the installation files must first be cop-
ied to a folder on your PC. The screen shown below enables you to change
the default folder for these installation files.
You may be prompted to restart the PC during the installation process for
Redirector. If so, restart the PC. The LabeLase® Installer (this program) will
automatically start after the reboot and will continue the installation and
start Redirector.
Click "Next" to install Redirector.
7j
Fig. 45
We recommend that you keep the default installation folder and click "Next"
to continue.
3. Installation