Task 6 save the calibration – MTS Series 793 User Manual
Page 194
Advertising
MTS Series 793 Tuning and Calibration
Encoder and Temposonics Calibration
Calibration Procedures
194
Task 6
Save the calibration
It is important that you save your sensor calibration values.
Standalone FlexTest SE Controllers: Select Setup > Open/Save Parameters >
<<Save>>
Automated Controllers: On the Station Setup window Inputs panel, click the
Calibration tab, and then Save. This saves current calibration values on the
Calibration, Sensor, and Shunt tabs to the sensor calibration file.
Advertising