MTS Series 793 Utility Software - Manual (Page 115)

Path: Start > Programs > MTS 793 System Software > Tools
You can also launch the application by typing ctrmgmttool from the command line.
5. In the CMT Controllers list, select the controller you just rebooted.
6. In the Next Controller Boot Mode selection list, select Service.
7. Reboot the controller again.
Press the CMT Reboot Controller button. The controller will boot up in the Service mode,
displaying the MTS logo.
8. Perform the desired service operation.
How to Install or Update System Files on FlexTest SE
Controllers
This procedure copies system files from the servicing PC to the selected FlexTest SE Controller.
System files include the executable code for the Controller and unit assignment sets(.uas).
1. If required, perform the procedure to put the controller in the Service boot mode.
2. Select the controller you wish to service from the displayed list of controllers.
3. Copy necessary system files to the selected controller.
Select either Install System Files or Update System Files.
Selecting Install System Files will delete all existing files before copying system files to the
controller. Be sure to back up files to the PC before making this selection.
4. Perform other operations as desired.
5. In the Next Controller Boot Mode selection list, select Standalone, Standalone w/Network, or
Automated, as appropriate.
6. Reboot the controller. Press CMT’s Reboot Controller button, or press the <<Reboot>> key on
the controller’s front panel. The controller will boot in the selected boot mode.
How to Update or Backup User Files on FlexTest SE
Controllers
The update procedure copies user files from the servicing PC to the selected controller. The backup
procedure copies files from the controller to the servicing PC. User files include the hardware
interface files (.hwi) and station configuration files (.cfg).
1. If required, perform the procedure to put the controller in the Service boot mode.
If you do not have a station loaded, you can also update or backup user files in the Automation,
Remote, or Local boot modes.
2. Select the controller you wish to service from the displayed list of controllers.
3. If desired, select Update User Files to copy user files in the servicing PC to the selected
controller. If the same files already exist on the controller, you will be prompted to verify
overwriting the existing files.
MTS Series 793 Utility Software 101
Controller Management Tool