MTS Series 793 Utility Software User Manual
Page 36
Advertising
•
Right-click the I/O Carrier icon and click Apply HWI Defaults. HWI defaults are applied to the
hardware resources in the I/O carrier.
•
Right-click a hardware resource in the Controller tree and click Apply HWI Defaults.
The HWI default settings are only applied to that hardware resource.
In this example, the default HWI values will only be applied to the selected 494.26 hardware
resource.
•
Right-click a specific hardware resource in the HWI Defaults tree and click Apply HWI Defaults.
The HWI default is applied to any instance of that particular hardware resource that appears
in the Controller tree.
22 MTS Series 793 Utility Software
HWI Hardware Settings
Advertising