MTS Series 793 Utility Software - Manual (Page 56)

Description Item
The System Rate must be an integer multiple of the Medium System
Rate.
Medium System Rate: Must be an integer multiple of the Low System
Rate.
The Low System Rate is always set at 25.6. The Medium System
Rate is typically 256.
Low System Rate: 25.6.
# of HPU Interfaces: Allows you to add or remove the HPU interface. Miscellaneous tab
# of HSM Interfaces: Allows you to add or remove the HSM interface.
Name: Describes this resource as it will appear in Station Builder
resource lists when opened against an .hwi file. Digital Input/Digital Output
icon
Changing this name may invalidate existing station configurations.
Connector: J54.
Channel: Not applicable.
Name: Describes this resource as it will appear in Station Builder
resource lists when opened against an .hwi file. Hydraulic Interface icon
(HPU)
Changing this name may invalidate existing station configurations.
Connector: J25.
HPU with HSM:
True: Indicates the system’s HPU supplies additional HSMs.
False: used for HPU only systems (allows HPU selection to be
available to Station Builder).
First On:
True: Indicates that the first HSM turned on activates the HPU.
False: Setting First On and Last Off to FALSE allows the HPU to turn
on independent of HSM power. Setting First On and Last Off to TRUE
allows HSM Low selection to activate HPU High without pressing
the HPU buttons.
Last Off: True: Causes the last HSM turned off to turn off the HPU.
Visible:
True: Indicates whether or not the HPU button is visible on the control
panel. Changing Visible to FALSE turns off the HPU button display
on the Station Manager window, provided both First On an Last Off
are True.
Name: Describes the hardware resource as it will appear in Station
Builder resource lists. Hydraulic Interface icon
(HSM)
Changing this name may invalidate existing station configurations.
Connector: J28
42 MTS Series 793 Utility Software
HWI Hardware Settings