MTS Series 793 Utility Software - Manual (Page 43)

Description Item
(SIM) function to a processor and define the number of input/output
ports.
Note:
Hybrid Simulation is set up by MTS personnel only. This is
described in an internal MTS document.
Model 493.50 ADDA II Board Settings
This board is compatible with Aero ST, FlexTest GT, FlexTest IIm, and TestStar IIm controllers.
Description Item
When the optional Model 493.50 ADDA II board is being
used, the .hwi file describes this board and the A/D, D/A, 493.50 ADDAII circuit board icon
DSPAD, and encoder mezzanine cards that are installed
on it.
The following ADDA II mezzanine cards can be installed:
• Model 493.55 8-A/D (8-Channel)
• Model 493.56 8-D/A (8-Channel)
• Model 493.57 8-A/D (8-Channel)
• Model 493.59-1 U2 Absolute
• Model 493.59-3 U2 Incremental
• Model 493.59-5 U2 Temposonics III
Each mezzanine card can be assigned to one of the four
ADDA II board rear panel connectors. Each mezzanine
card definition is followed by four or eight signal definitions.
The analog I/O definitions provide A/D channels and D/A
channels for analog inputs and outputs from the 498 Analog
In transition boards.
The channel numbers for the analog inputs represent the
available analog-to-digital converters following the list of
AC and DC conditioner signals.
The channel numbers for the analog outputs represent the
available digital-to-analog converters following the list of
valve command signals.
Address: Describes the proximity of the circuit board within
the chassis. This value is generated during initialization, Properties tab
and should be changed only if the value read in from an
existing .hwi file is in error.
MTS Series 793 Utility Software 29
HWI Hardware Settings