MTS Series 793 Utility Software - Manual (Page 80)

Description Item
UART Serial Comm icon Note:
Only appears when UART is selected as the device type.
Connector: the connector that joins the resource to the chassis.
Name: describes this resource as it will appear in Station Builder
resource lists when opened against an .hwi file.
Note:
Changing this name may invalidate existing station
configurations.
Baud Rate: select the baud rate for the serial device.
Type: select the type of device (2-wire or 4-wire). This setting defines
which pins are used and how the system communicates with the
UART device.
Note:
Model 409 Temperature Controllers are 2-wire devices; Model
494.05 Handsets are 4-wire devices.
Application Attribute: Not applicable
External Clock icon Note:
Only appears when external clock is selected as the device
type.
Name: Describes this resource.
Note:
Changing this name may invalidate existing station
configurations.
Output Clock Rate: enter the frequency (Hz) for the clock output.
Application Attribute: Not applicable
SSI/Gurley Encoder Application Settings
Encoder Settings Application
Type = Unsigned Type = Signed
N/A Physical Zero Position at Minimum
or Maximum Stroke (device
dependent)
66 MTS Series 793 Utility Software
HWI Hardware Settings