Rockwell Automation 1512A MV Controllers - 800A One-High Cabinet User Manual
Page 18
Advertising
2-8
Installation Standard Enclosure
1512A-UM102B-EN-P – June 2013
Figure 2.7 – Side Bus Access Cover Removed
Front Access – Top Incoming Load Cables
1) Complete the Power Lockout Procedure (see page 5-3) for both
medium voltage power cells and the power bus.
2) Open the low voltage cell door (see page 2-1).
3) Open the medium voltage cell doors (see page 2-2).
4) Remove the two self-tapping screws from the low voltage panel if
installed. (Installed for shipping purposes – see Figure 2.8).
Access to the Power
Bus
Advertising