Rockwell Automation 1512A MV Controllers - 800A One-High Cabinet User Manual
Page 92
Advertising
B-10
ArcShield Plenum Installation Instructions
1512A-UM102B-EN-P – June 2013
STEP 3 – Sequence of Final Assembly
All Plenums in a Line-up must be mounted to the top of each enclosure
and to the Plenum directly beside it before the front duct sections are re-
attached. (Refer to Figure B.4)
End Cover Plate
Figure B.9 – Sequence of Final Assembly
The “End Cover Plate’” must be mounted on the closed end of the Line-
up at this time during the assembly using 5/16” hardware.
(See figure B.9
Left side)
Advertising