User-configured data table – Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit User Manual
Page 122
122
Rockwell Automation Publication 1408-UM001D-EN-P - September 2013
Appendix B SCADA Applications
3. Click OK and start viewing data.
User-configured Data Table
The 1408-EM3 model provides a user configured data table. You may select the
16 floating-point parameters that comprise this table. Your application may read
this table as connected input instance 1, or as CSP file F9 using explicit
messaging.
Setup
You must use serial or Ethernet network communication to set up and read the
user configured data table.
To set up the user configured table, using explicit messaging, write a new
configuration to the User Configured Table Setup table.
See
page 111
for the content, default parameters and addressing details of the
setup table.
list the available selections for the parameters.