Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit - Manual (Page 16)

16 Rockwell Automation Publication 1408-UM001D-EN-P - September 2013
Chapter 1 PowerMonitor 1000 Overview
Use the LCD Screen
The power monitor has an onboard LCD for viewing and configuration. Buttons
are provided to control the display. The display has three modes of operation.
• Display mode lets you select and view parameters including metering,
event log, and self-test information.
• Program mode lets you change configuration parameters, with security
against unauthorized configuration changes. Each power monitor is
password protected.
• Edit mode lets you modify the selected parameters. In Edit mode, a
highlight cursor appears under the value of the parameter being modified,
starting at the right-hand (least significant) digit.
The diagram and table shows the LCD interface buttons and their functions.
Figure 1 - LCD Interface
The buttons function differently in each mode. The power monitor enters into
Display mode by default.
User choices for display and configuration are organized in a hierarchical menu
system within the power monitor.
PowerMonitor 1000
RS-485 STATUS
RX TX Mod Net
Up Arrow Escape
Enter
Down Arrow
Button Mode
Display
Program Edit
Escape Returns to parent menu
At top menu, selects default screen
Cancels changes to the parameter and returns
to Program mode
Up arrow Steps back to the previous parameter or menu item Increments the value of the highlighted digit
Down arrow Steps forward to the next parameter or menu item Decrements the value of the highlighted digit
Enter Steps into a sub-menu or sets
default screen
Steps into a sub-menu, selects the
parameter to be modified or
changes to Edit mode
Saves the parameter change and returns to
Program mode
Up and down arrows
together
Refreshes the display No effect Moves the highlight cursor one character to the
left