Powermonitor 1000 – Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit User Manual
Page 20
20
Rockwell Automation Publication 1408-UM001D-EN-P - September 2013
Chapter 1 PowerMonitor 1000 Overview
3. Press <up> or <down> once.
Program appears in the display. Press <enter>.
4. Press <enter> if the password has not been changed from the default
(0000).
If the password has been changed, then enter the correct password.
When the correct password is entered, Program Setup appears in the
display. The power monitor is now in Program mode.
If an incorrect password is entered, Invalid Password appears. Press any
button to try again.
5. Press <enter>.
Analog Input appears in the display. Press <down>.
PowerMonitor 1000
RS-485
STATUS
RX TX Mod Net
Password
0000
PowerMonitor 1000
RS-485
STATUS
RX TX Mod Net
Program
Setup
PowerMonitor 1000
RS-485
STATUS
RX TX Mod Net
Advanced
Setup