Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit User Manual
Page 62
Advertising
62
Rockwell Automation Publication 1408-UM001D-EN-P - September 2013
Chapter 5 Explicit Messaging
Follow these steps to configure a message.
1. Choose an available message data block in your message instruction.
In this example, we used MG9:0.
2. Click Setup Screen at the bottom of the message instruction.
The message configuration window for either Ethernet network or Serial
communcation appears.
3. Choose the appropriate parameters in the Message Configuration window.
Ethernet Network Communication
Serial Communication
Advertising
This manual is related to the following products: