Rockwell Automation 1440-VAD02-01RA XM-123 Aeroderivative Module - Manual (Page 11)

Publication GMSI10-UM003D-EN-P - May 2010
3
Organization
To help you navigate through this manual, it is organized in chapters based on
these tasks and topics.
Chapter 1 "Introduction" contains an overview of this manual and the
XM-123 module.
Chapter 2 "Installing the XM-123 Aeroderivative Module" describes how to
install, wire, and use the XM-123 module.
Chapter 3 "Configuration Parameters" provides a complete listing and
description of the XM-123 parameters. The parameters can be viewed and
edited using the XM Serial Configuration Utility software and a personal
computer.
Appendix A "Specifications" lists the technical specifications for the XM-123
module.
Appendix B "DeviceNet Information" provides information to help you
configure the XM-123 over a DeviceNet network.
Appendix C "DeviceNet Objects" provides information on the DeviceNet
objects supported by the XM-123 module.
Appendix D "Guidelines for Setting the Full Scale Value" provides guidelines
for determining the optimal Full Scale value in the XM-123 module.
For definitions of terms used in this Guide, see the Glossary at the end of the
Guide.
Document Conventions
There are several document conventions used in this manual, including the
following:
The XM-123 module is referred to as XM-123, device, or module throughout
this manual.
TIP
A tip indicates additional information which may be
helpful.
EXAMPLE
This convention presents an example.