Rockwell Automation 1440-VAD02-01RA XM-123 Aeroderivative Module - Manual (Page 126)

Publication GMSI10-UM003D-EN-P - May 2010
118
Instance Attributes
Services
1 Attributes can only be set while the device is in Program Mode. See the description of the Device Mode Object
for more information.
Table C.23 Parameter Object Instance Attributes
Attr ID
Access
Rule
Name Data Type Description Semantics
1 Set Parameter
Value Actual value of parameter See Table C.22 for a list of valid
values for each instance.
2 Get Link Path Size USINT Size of Link Path 0 (These Parameter instances do
not link directly to another
object attribute.)
3
Get
Link Path ARRAY of
DeviceNet
path DeviceNet path to the
object for the Parameter
value.
Segment
Type/Port BYTE See DeviceNet
Specification Volume 1
Appendix I for format.
Segment
Address See DeviceNet
Specification Volume 1
Appendix I for format.
4 Get Descriptor WORD Description of Parameter 0
5 Get Data Type EPATH Data Type Code See DeviceNet Specification
Volume 1 Appendix J, Section
J-6.
6 Get Data Size USINT Number of Bytes in
Parameter value.
Table C.24 Parameter Object Services
Service
Code
Class/Instance Usage Name Description
0E
h
Class/Instance Get_Attribute_Single Returns the contents of the
specified attribute.
10
h
Class Set_Attribute_Single Sets the contents of the
specified attribute.
1