Rockwell Automation 1440-VAD02-01RA XM-123 Aeroderivative Module - Manual (Page 137)

Publication GMSI10-UM003D-EN-P - May 2010
129
Overall Measurement
Object
(Class ID 322
H
)
The Overall Measurement Object models the measurement of the amplitude
of a signal including a wide frequency range.
Class Attributes
The Overall Measurement Object provides no class attributes.
Instances
There are 2 instances of this object.
Instance Attributes
16
h
Instance Save Validate the device
configuration settings if
necessary and save them to
non-volatile memory.
09
h
Instance Delete Delete the saved
configuration from
non-volatile memory.
15
h
Instance Restore Load the saved
configuration or the factory
default configuration from
non-volatile memory.
Table C.38 Device Mode Object Services
Service
Code
Class/Instance Usage Name Description
Table C.39 Overall Measurement Object Instance Attributes
Attr ID
Access
Rule
Name Data Type Description Semantics
3 Get Overall Value REAL Measured value The output value of the
measurement performed by the
Overall Measurement Object on
the input signal. The result of
the measurement process
specified by Measurement is
converted to the units specified
by Data Units to produce the
Overall Value.