Metrohm IC Net 2.0 - Manual (Page 132)

7 Methods
IC Net 2.0 124
7.5.5 Peak identification
IC NET / Method / Calibration / Identification
Selecting this menu item or clicking on <Identification> in the
component table opens the
Peak identification
window with pa-
rameters for tuning the peak identification procedure.
Number of components
Number of components in the component
table (read-only).
Scheme
Quick choice of identification parameters
scheme.
Standard
Set default meanings of identification pa-
rameters:
Height
for reference components,
Time
for all other components (ordinary
components).
Nonstandard
Set custom meanings of identification pa-
rameters.
Identification
Identification parameters.
Reference peaks
Identification parameter for reference com-
ponents. Default is
Height
.
Other peaks
Identification parameter for ordinary com-
ponents. Default is
Time
.
Retention units Choice of retention units. Default is min .
Retention time Retention time.
<Update> Updates expected retention times of com-
ponents according to the current chroma-
togram.