Metrohm IC Net 2.0 - Manual (Page 22)

3 Software settings
IC Net 2.0 14
ences
, open the
Workplace
window, change
hardware settings of interfaces and devices,
and change Security options.
Administrator
Access to all program functions. This level
should be switched on only while installing the
system or in the case of configuration change.
The administrator user is authorized to change
access levels, names and passwords of other
users
It is recommended to make user lists and enter passwords as a
first action after software installation. So, select the menu item IC
NET / Options / Security and click on <Log In> in the IC Net login
window without entering a password. The Security options window
appears:
Enter user name, password and access level for all users. Don't
forget to make one of the user an
Administrator
, otherwise this
window will not open again. At the end, click on <OK> .
After configuration of the security system the program prompts
for the password every time the system starts. This user name
stamps all methods, chromatograms and reports. It is possible at
any time to change the user with the menu item
IC NET / Options /
Lock system .
3.3 Global settings
IC NET / Options / Global preferences
This window is used for global program settings. It can be
opened only by the user with Administrator access level.