Metrohm IC Net 2.0 - Manual (Page 79)

6.6 Metrohm solvent delivery unit
IC Net 2.0 71
Pressure
Live display of current pressure in MPa.
This field is also available for the WATCH
WINDOW .
Flow Live display of current flow in mL/min. This
field is also available for the WATCH WIN-
DOW .
New flow A new flow can be set by moving the scroll
bar, by entering a value or by changing the
value using the up and down arrows.
Entry range: 0.01 ... 20.00 mL/min (depending
on number of pumps)
Min/Max pressure The minimum and maximum pressure limit
for the individual pump units can be set in
steps of 0.1 MPa.
Entry range: 0.0 ... 50.0 MPa .
%B Individual flow rate for pump B in percent of
total flow.
Entry range: 0 ... 100 %
%C Individual flow rate for pump C in percent of
total flow.
Entry range: 0 ... 100 %
%D Individual flow rate for pump D in percent of
total flow.
Entry range: 0 ... 100 %
Stop after Stop time for all pump drives.
Entry range: 0 ... 99999 min
<Set>
Send current parameters immediately to
the pump control system. Parameters are
not stored in the system file ( *.smt ) as long
as the file is not saved.
<Start> Start all pump drives.
<Stop> Stop all pump drives.