Metrohm IC Net 2.0 - Manual (Page 175)

9.3 Sample queue editor
IC Net 2.0 167
Vial
Autosampler vial position to take sample
from.
Volume Injected volume of sample in µ L.
Dilution Sample dilution prior to injection.
Amount Sample amount. If this value is different for
the calibration run (c) and the sample run
(s), the component concentrations of the
sample are calculated as follows:
C
s
= C
c
• Amount
s
/ Amount
c
Internal standard amount
Concentration of the internal standard
component for relative concentration cal-
culations.
Level
Calibration level (see section 7.5) for the
sample: Level
0
stays for normal analysis,
levels 1 and greater for calibration runs.
Correct filling of this column enables to cal-
culate calibration coefficients automatically.
Injections Number of injections for the same vial po-
sition (only 1 injection is permissible for
Level ≥≥ 1 ).
Done Indication whether the sample determina-
tion has been done or not:
0 determination not yet done
1 … …n determination or injection done
Sample Info 1 First sample description.
Sample Info 2 Second sample description.
9.3.2 Sample queue editor functions
The functions in the editor window for sample queues can be
triggered with the corresponding menu items of the Edit menu or
with the corresponding symbols in the symbol bar.
QUEUE EDITOR / Edit / Undo
Undo the last modification of the sample queue table.
QUEUE EDITOR / Edit / Cut row(s)
Cut the selected rows of the sample queue table and copy them
into the clipboard.
QUEUE EDITOR / Edit / Copy row(s)
Copy the selected rows of the sample queue table into the clip-
board.