Metrohm IC Net 2.0 - Manual (Page 33)

4.4 System settings
IC Net 2.0 25
Start with inject
The time program of the loaded object or
the data acquisition ( RECORDER ) is started
at the moment the sample is injected.
The objects can be moved from one field to the other using the
or buttons.
4.4.4 Install new devices
SYSTEM / Setup / New devices/ Install new device
Add new devices to the open SYSTEM window. For every device
to be added to the system, open the group which contains this
device and select the device and the serial port of the interface
where the device is connected to. After clicking on <Add to sys-
tem>
, the device is added to the
SYSTEM
window. If desired, an
additional data recorder and a timer of the
More modules
group
can be added to the system.
4.4.5 Install existing devices
SYSTEM / Setup / New devices/ Link to existing device
Add devices to the open SYSTEM window which
are already present on the toolbar. This is mostly
used to add the 761 Compact IC or 762 IC Interface
events . For every device to be added to the sys-
tem, select the device and click on
<OK>
.
4.4.6 Print system parameters
SYSTEM / Setup / Parameters / Print
A report of the system parameters including the time program is
created and opened using the «Wordpad» program. The *.txt file
opened can be printed, saved and exported into other programs.
The system report includes the following elements:
STARTUP HARDWARE
Name of the method linked to the system
Main measurement channel
Configuration settings for the devices
System startup values
START WITH DETERMINATION
Objects defined in the
Start mode
window.
The time programs are printed if the pro-
grams are enabled.
START WITH INJECT
Objects defined in the
Start mode
window.
The time programs are printed if the pro-
grams are enabled.