Metrohm IC Net 2.0 User Manual
Page 27
4.1 System creation
IC Net 2.0
19
After clicking on
<Finish>
, the user is asked to save the new sys-
tem as a system file
system file (
*.smt
) in the new system folder. The new
system is now ready to start a determination (see section 4.3.3).
4.1.2
System window
A system window is opened with
IC NET / File / Open / System
and
the selection of the desired system file. It contains icons for Data
recorder, Watch window (screen) and all the devices installed
with the system wizard.
4.1.3
Add devices to an existing window
SYSTEM / Setup / New devices/ Install new device
Add new devices to the open
SYSTEM
window. For every device
to be added to the system, open the group which contains this
device and select the device and the serial port of the interface
where the device is connected to. After clicking on
<Add to sys-
tem>
, the device is added to the
SYSTEM
window. If desired, an
additional data recorder and a timer of the
More modules
group
can be added to the system.
Watch window
Data recorder
Devices