Metrohm IC Net 2.0 User Manual
Page 58
5 Interfaces
IC Net 2.0
50
Hardware error
Hardware error detected at the 761 Com-
pact IC (high-pressure pump, injection
valve, or suppressor not working correctly).
Alarm leak detector
Leak detector has detected solvent in the
instruments interior.
Remote line
Set remote output lines 1
…
8.
Selection:
0
(line off, inactive, open)
1
(line on, active, 0 V)
p
(pulse output)
*
(leave line in current status)
PowerOn values
Display of the power on startup values for
remote output lines set on the
Hardware
tab.
Pulse length
Length of a pulse in ms.
Alarm stops
The
Alarm stops
tab of the hardware settings window defines the
events for which the 761 Compact IC is stopped immediately. At
an alarm stop, high-pressure pump and peristaltic pump are
stopped immediately, the running determination and the active
sample queue are also stopped.
Event
Events for alarm stop:
Pump stop
Pump stopped because pressure limits are
exceeded.
Hardware error
Hardware error detected at the 761 Com-
pact IC (high-pressure pump, injection
valve, or suppressor not working correctly).
Leak
Leak detector has detected solvent in the
instruments interior. This information is also
stored in the instrument itself, so that it is
stopped automatically even without con-
nection to the PC.
Power on
Temporary power failure at the 761 Com-
pact IC hardware.