Metrohm IC Net 2.0 - Manual (Page 62)

6 Devices
IC Net 2.0 54
For every device to be controlled with «IC Net», open the group
which contains this device, select the device and the Serial port of
the interface where the device is connected to. After clicking on
<Add to system> , the device is added to the SYSTEM window. If
desired, an additional data recorder and a timer of the More mod-
ules group can be added to the system.
Details to the other steps of the system wizard procedure
(processing method, data source) see section 4.1.1.
6.1.2 Install new devices in system window
SYSTEM / Setup / New devices/ Install new device
Add new devices to the open SYSTEM window using the New
system wizard window (see above). For every device to be added
to the system, open the group which contains this device and
select the device and the serial port of the interface where the
device is connected to. After clicking on
<Add to system>
, the de-
vice is added to the
SYSTEM
window. If desired, an additional
data recorder and a timer of the
More modules
group can be
added to the system.
6.1.3 Install existing devices in system window
SYSTEM / Setup / New devices/ Link to existing device
Add devices to the open SYSTEM window which
are already present on the toolbar. This is mostly
used to add the 761 Compact IC or 762 IC Interface
events . For every device to be added to the sys-
tem, select the device and click on
<OK>
.
6.1.4 Delete devices
Icon / Unlink
Devices in a SYSTEM window can be deleted by clicking on the
device icon using the right mouse button an select the Unlink
menu item.