Metrohm IC Net 2.0 - Manual (Page 28)

4 Systems
IC Net 2.0 20
4.2 System file handling
The following menu items are used for opening, changing, saving
and closing of systems:
IC NET / File / Open / System
Load an existing system file (
*.smt
) from the
Systems
directory
and open the corresponding SYSTEM window. The name of the
folder and of the system file are displayed in the title bar of the
SYSTEM window. A star ( * ) at the end of the name indicates that
the system settings have been changed since the last saving.
SYSTEM / System / Open other
Load an existing system file ( *.smt ) from the desired system folder
in the Systems directory and open a new SYSTEM window for pa-
rameter settings. The old system remains connected.
SYSTEM / System / Change
Open the selected new system in the desired system folder. The
current system is disconnected and closed, and the new system
is connected.
SYSTEM / System / Save
Save the current system file (
*.smt
) in the desired folder of the
Systems directory.
SYSTEM / System / Close
Close the selected system.
Delete a system
To delete an existing system, delete the *.smt file in the Systems
folder.
4.3 System functions
4.3.1 Connect and disconnect system
To make possible manual control of the system devices and start
of determinations, the selected system must be connected to the
workplace. Systems are connected and disconnected as follows:
SYSTEM / Control / Connect to workplace
Connect selected system to the workplace. Only one system from
the same system folder can be connected at the same time.
The icon appears on the toolbar. If this icon is clicked, the
SYSTEM window is always displayed in front of all other windows.