Metrohm IC Net 2.0 - Manual (Page 73)

6.4 733 IC Separation Center
IC Net 2.0 65
If the system is connected and the
733 icon
is clicked with the
right mouse button, the following menu appears:
Open
Open the
733 IC Separation Center
window for parame-
ter settings (this window can also be opened by dou-
ble-clicking the icon).
Unlink Delete the 733 icon from the system.
6.4.3 733 IC Separation Center window
733 icon / Open
The 733 IC Separation Center window for parameter settings is
opened by selecting this menu option with the right mouse button
or by double-clicking the 733 icon in the SYSTEM window. It con-
sists of the two tabs IC733 and Links .
IC733
The IC733 tab of the 733 IC Separation Center window is only avail-
able for a connected system. The parameters and buttons for
manual operation depend on the type of instrument connected.
Configuration
Display of current instrument configuration.
valve A
733 IC Separation Center with 1 injector.
valve A + valve B 733 IC Separation Center with 2 injectors.
valve A + suppressor
733 IC Separation Center with 1 injector
and 1 suppressor module.
Valve A
fill/inject
Display of current valve position.
<FILL>
Switch valve A to "fill" position.
<INJECT> Switch valve A to "inject" position.
Valve B
fill/inject Display of current valve position.
<FILL> Switch valve B to "fill" position.
<INJECT> Switch valve B to "inject" position.