Monarch Instrument DC 2000 - Manual (Page 136)

Appendix B – Configuring a 4-20 mA input to equal 0 to 150 gpm
Page 2 of 7
The menu containing types of inputs should now be
displayed. Use the up/down arrow keys to select Linear
then touch ENTER .
The menu starting with Point tag will appear again. Using
the up/down arrow keys select Output scale and touch
ENTER .
An alphanumerickeypad will be displayed. This is where
you enter a word or phrase (up to 10 characters*) that
describes this particular point. There are multiple pages of
letters, numbers and symbols that can be used. Use the
PAGE , PAGEBK and SHIFT keys to access the different
characters. For this example enter the word EFFLUENT
and touch ENTER .
* Only 8 characters will be displayed on the screen although
all ten will be recorded and can be displayed using the
Companion Software .
The menu displaying types of linear inputs should now
appear. For this example use the up/down arrow keys to
select 4-20 mA and touch ENTER .
The menu starting with Point tag will appear. Using the up/
down arrow keys select Point tag and touch ENTER .
6.
9.
8.
7.
If you are configuring the Recorder for the first time, a menu
having Setup pt , Copy pt and Restore pt will appear. If
you are changing a point that you have already configured,
the menu will have Modify pt and Delete pt . Depending on
which menu appears, use the up/down arrow keys to select
Setup pt or Modify pt and then touch ENTER .
5.