Monarch Instrument DC 2000 - Manual (Page 76)

Page 5-10
Chapter 5 Programming
The display reads ‘KX ÎXXXXXXXXXXXXÍ‘ (only a total of 13 characters will show on display). Press ENTER to
accept the displayed Constant Value or use the Numeric Keypad to program the desired Constant Value (13 is
maximum number of places, including decimal points, available). The constants are entered in decimal (0.002345)
or exponential (2.345E-3) and may be positive or negative. When the desired value for the constant is programmed,
press ENTER or EXIT to return to the “Define KX” menu item. Press EXIT once more to return to the Point
Programming menu.
5.6.2 Programming Points
This menu item is available through the Program Menu and allows the user to setup, copy, restore, modify, or
delete a point’s parameters. The programming sequence follows a general order for custom programming and
the system prompts you to submit various parameters.
Programming Points - At the Main Program Button Bar, press the PROGram Key. Use the UP ( ↑) or DOWN
( ↓) Arrow Keys to highlight “Points” and press ENTER.. Use the UP (↑) or DOWN (↓) Arrow Keys to highlight
“Prog point” and press ENTER.
5.6.2.1 Choosing a Point Number
The display reads “point? x”. Use the numeric keypad (1 - 9, A - F) to enter the point to be programmed or
modified.
Press ENTER to accept the displayed point number and the display reads one of the followings menu
items:
Setup pt
Copy pt
Restore pt
or, if the point has already been setup:
Modify pt
Delete pt
5.6.2.2 Setup an Unprogrammed Point
Use the UP (
↑) or DOWN (↓) Arrow Keys to highlight “Setup pt” and press ENTER. The display reads the
Point Type Menu as follows:
Linear
Ind sqrt
Log linear
T/c
Rtd
Calculated
Conditional
External