Monarch Instrument DC 2000 User Manual
Page 57
Chapter 4 Operation
Page 4-5
NOTE: To have the point information come up automatically at power up and be the default display, use
the Display Programming option to set “Points” as the Powerup display default. The “Autojog”
default option will cycle through all points. Refer to Section 5.4.3.
4.2.1.2 Alarms
To display an Alarm status, press the DISPL Key and use the UP (
↑
) or DOWN (
↓
) Arrow Keys to highlight
“Alarms”. Press ENTER . The display will show the status of the alarms. If no alarms are present the
display will show “NO ALARMS”, if more than one alarm is active, the display will cycle through all active
alarms. If the Alarm check option is turned off, this will be indicated on the display as “ALM CHKS OFF”
NOTE: To have the Alarm information come up automatically at power up and be the default display, use
the Display Programming option to set “Alarms” as the Powerup Display default. Refer to Section
5.4.3.
4.2.1.3 Junction Temp
To display Cold Reference Junction Temperature, press the DISPL Key and use the UP (
↑
) or DOWN (
↓
)
Arrow Keys to highlight “Junction Temp”. Press ENTER . The display will show the cold reference junction
temperature in degrees Fahrenheit (
°
F) (degrees Celsius (
°
C) if the time format is set to European).
NOTE: To have the Junction Temperature information come up automatically at power up and be the
default display, use the Display Programming option to set “Junction Temp” as the Powerup
Display default. Refer to Section 5.4.3.
4.2.1.4 Version
This function displays the software version number in a pop-up window. To display the version of software
in your unit, press the DISPLay Key and use the UP (
↑
) or DOWN (
↓
) Arrow Keys to highlight “Version”.
Press ENTER and the version of software in your unit will be displayed. Press OK to return to the Version
menu item then EXIT to return.
4.2.1.5 Media Status
This function displays the status of a disk. To display the media status
window, press the DISPLay Key and use the UP (
↑
) or DOWN (
↓
) Arrow
Keys to highlight “Media Status”. Press ENTER and a window will be
displayed (Figure 4-2) showing the total size of the disk, the amount of
free space available on the disk, the write protected status, the status
of the format, and battery information for PCMCIA cards. To remove the
media status window, press the DISPLay Key and use the UP (
↑
) or
DOWN (
↓
) Arrow Keys to highlight “Media Status”. Press ENTER and
the window will clear.
Total Size:
1,423 K
Free:
1,141 K
Write Prot:
NO
Format:
OK
Battery:
N/A
Figure 4-2
Media Status Window