Monarch Instrument DC 2000 - Manual (Page 150)

Appendix D – Configuring the Totalizer
Page 2 of 5
The menu containing types of inputs should now be
displayed.Use the up/down arrow keys to select
Calculated and then touch ENTER .
The menu starting with Point tag will again be displayed.
Use the up/down arrow keys to select Decimal fix and touch
ENTER .
An alphanumeric keypad will be displayed.This is where
you enter a word or phrase (up to 10 characters*) that
describes this particular point.There are multiple pages of
letters, numbers and symbols that can be used.Use the
PAGE , PAGEBK and SHIFT keys to access the different
characters.For this example enter the word TOTAL and
touch ENTER .
* Only 8 characters will be displayed on the screen although
all ten will be recorded and can be displayed using the
Companion Software .
The menu displaying the various calculated channel types
should now appear. For this example use the up/down
arrow keys to select
Totalize
and then touch
ENTER
.
The menu starting with
Point tag
will appear. Using the up/
down arrow keys select
Point tag
and touch
ENTER
.
6.
9.
8.
7.
If you are configuring the Recorder for the first time, a menu
having
Setup pt
,
Copy pt
and
Restore pt
will appear. If
you are changing a point that you have already configured,
the menu will have
Modify pt
and
Delete pt
. Depending on
which menu appears, use the up/down arrow keys to select
Setup pt
or
Modify pt
and then touch
ENTER
.
5.